The Value of Construction Mockups

Hixson’s construction specifications typically include items or assemblies that require the contractor to provide mockups for Hixson (as the Architect/Engineer) and the facility’s Owner to approve prior to the installation of the finished product. These mockups are called out for scopes of work which we have found to be challenging for contractors to get correct on the first or even the second try. In the April issue of Hixson’s From Experience newsletter, we provide an inside look at the value of construction mockups. Read it today!

Date: April 29, 2024

Categories: Food & Bev

Related Insights

EH&S From Experience: HFC Refrigerants

In the latest issue of Hixson’s EH&S From Experience newsletter, we noted that as of January 1, 2026, 40 CFR Part 84 requires Hydrofluorocarbons (HFCs) listed under Appendix A to be phased down due to their global warming potential. This does not limit use of existing equipment: It phases out future use of HFC on […]

Container Quality Assurance: Using X-Ray Technology

Today, x-ray technology is increasingly being used in the food and beverage processing industry for container integrity, level detection, and foreign material detection. Keep in mind, though, that facilities which use equipment that generates radiation for any purpose will need a radiation program. The latest issue of Hixson’s EH&S From Experience newsletter looks at x-ray […]

February From Experience: Bonus Content

As discussed in the February issue of From Experience, proper pipeline and component sizing are essential for effective pressure control in a liquid system. To develop a well-balanced piping system, pressure control devices should be integrated into the design. A few typical devices with actuated control valves include: Back Pressure Regulators/Pressure Regulators. Back pressure regulators […]

From Experience – February 2025

Maintaining optimal pressure within a liquid system is crucial for ensuring all the users are getting required flow, which helps prevent process upsets. Flow and pressure are interrelated in a pressurized system. In the February issue of Hixson’s From Experience newsletter, we look at the design considerations for pressure control in liquid systems. Read it […]

Three Key Reasons For Utilizing Simulation

Spreadsheet programs are used for data analysis by nearly every organization across the globe. While these programs work well for quick data analysis, they struggle with modeling complex systems. In manufacturing, simulation provides a more advanced solution for developing models that include the various micro-processes making up a larger production line. In the latest issue […]

Understanding Building Automation System (BAS) Communication Protocols

A Building Automation System (BAS) integrates various controls to enhance energy efficiency and reduce operational costs. However, ensuring all equipment works in harmony presents a key challenge: For optimal performance, the devices within a BAS must communicate seamlessly. This communication depends on protocols – standardized methods for exchanging data between devices. In the latest issue […]

Nitrogen vs. Compressed Air for Dry Sprinkler Systems

Many facilities use compressed air for dry sprinkler systems, due to convenience and a lower initial investment. However, compressed air is also a common failure point for these systems, as its use can lead to pinhole leaks. Since these leaks can compromise entire sections of the dry sprinkler system, daily operations must be shut down […]

EH&S FE: Wastewater Pretreatment Systems Part 2

In the Summer issue of EH&S From Experience, we outlined six signs that you may need install a wastewater pretreatment system…or improve the one you have. After conducting research or discussions with your local sewer department, you may determine that it’s time for a new or upgraded system. If so, the next step is to […]

The Value of Interstitial Spaces

The production areas within a food and beverage plant are the most critical spaces in the facility. In addition to the production equipment itself, these areas require the appropriate design and maintenance to support proper hygiene and sanitation. They are also typically the most utility-intensive spaces as well. In the latest issue of Hixson’s From […]

Propylene Glycol: Too Much of a Good Thing

Throughout the food processing industry, propylene glycol is used in process heat transfer coolant systems when direct cooling with primary refrigerants is not acceptable, and the use of water alone would be at risk of freezing. After system maintenance or repairs, the propylene glycol and water concentration must be replenished in the system. Yet over […]

Sign Up For More Insights

Connect with the latest industry trends and insights with our newsletters. We provide the knowledge that powers the future.

Subscribe now